Skip to content

Clash and separation checks

BIM workflow & handover ▸ Clash & separation checks measures every sewer against every other buried service and reports where they conflict.

KindWhat it means
Clashthe pipes physically intersect
Horizontalcloser in plan than the standard allows
Verticalinsufficient clearance where they cross
Orderthe water main passes below the sewer where the standard requires it above
Coverless cover over a buried pipe than the standard requires

Each is graded critical, major or advisory, and carries the measured separation beside what the rule set requires, so the shortfall is explicit rather than implied.

Separations are not universal, so the standard applied is chosen and cited:

  • UK · Sewers for Adoption / NJUG - 3 m horizontal, 300 mm vertical clearance at crossings with the water main above, 0.9 m minimum cover.
  • US · Ten States Standards - 10 ft horizontal, 18 in vertical clearance at crossings with the water main above, 3 ft minimum cover.

The citation travels with the report. “Too close” means nothing without the rule it is too close for.

Click any finding to jump to the asset on the map. Findings also appear as severity-coloured markers in the 3D underground view, which is where “that one, under that street” becomes obvious in a way a list never manages.

Export CSV gives you the schedule.

Findings as IFC writes the conflicts themselves as a file the coordinator opens alongside everybody else’s geometry.

Each finding is an IfcAnnotation at its true coordinate, not a pipe. A clash is not a thing that exists - it is a statement about two things that do, and a viewer showing it as a pipe segment would be lying in a way that is easy to act on.

The marker is a sphere sized by the shortfall, so 50 mm short does not look like 500 mm short. Each carries a Pset_ClashFinding with both element ids, the measured separation, the required separation, the shortfall, the rule set, and whether the depth was assumed.

Where the model has a CRS, the findings are georeferenced, which matters more here than on the model export: a findings file is opened alongside somebody else’s geometry, and without it the markers land at the CRS false origin instead of on their drawing.

Requires a Pro plan.