Skip to content

Build from GIS data

If you already hold the network as GIS, you do not need to draw it. Start from Project ▸ Model from GIS (Shapefile/GeoJSON).

Shapefiles (.shp with their .dbf/.prj companions) and GeoJSON. Points become nodes, lines become links, polygons become subcatchments.

Multiple layers can be brought in together, each mapped to a different element type - for example a manhole point layer, a pipe line layer, and a catchment polygon layer in one pass.

The importer previews your data on a map and asks which of your fields correspond to which SWMM properties: which column is the invert level, which is diameter, which is roughness, which identifies upstream and downstream nodes.

Anything you do not map gets a sensible default, so an import with only geometry still produces a runnable model. Come back and fill in the rest afterwards.

If a .prj accompanies the shapefile, the coordinate system is read and reprojected automatically. Models in a national grid are recognised and placed on the basemap at their true position.

Run Validate immediately. GIS exports very often carry problems that do not matter in a drawing but do matter in a hydraulic model: pipes referencing manholes that were filtered out, duplicate identifiers, nodes with no connection, or inverts above ground.

Then open the Design check once you have run it, which adds the hydraulic problems - adverse slopes, pipes that surcharge, velocities too low to self-cleanse.

The same formats work in reverse. Project ▸ Export model as GeoJSON or Export model as Shapefiles (.zip) brings the network back into your GIS, and Export SWMM model (.inp), available on every plan, writes a file to open in desktop SWMM.