Green infrastructure and LID
Low-impact development controls reduce runoff at source rather than conveying it away. SWMM models eight types, all supported here: bio-retention cells, rain gardens, green roofs, infiltration trenches, permeable pavement, rain barrels, rooftop disconnection and vegetative swales.
How they work in the model
Section titled “How they work in the model”An LID control is defined by its layers - surface, soil, storage, drain - each with its own depth and properties. You then assign controls to subcatchments, saying what fraction of the catchment each one occupies.
Runoff routes through the layers: some infiltrates, some is stored and released slowly, some overflows when capacity is exceeded.
Testing whether it works
Section titled “Testing whether it works”Build it as a scenario against the base and compare. On a test network, adding LID to a combined system cut peak flow by roughly 44 percent and flooding by about 98 percent - but those numbers are that network, that storm, that design.
Design considerations
Section titled “Design considerations”- Underdrains control how quickly storage empties and therefore whether it is available for the next storm.
- Soil infiltration rate dominates performance. If it is uncertain, it is the first thing to test sensitivity against.
- Placement matters: upstream of a known bottleneck helps far more than the same area placed anywhere.