Repairing network topology
A network imported from GIS is usually nearly connected. These tools are under Trace network in the toolbar, and every one of them is undoable.
Repair topology
Section titled “Repair topology”Finds nodes that lie on a pipe but are not joined to it - the classic GIS import defect, where a manhole sits visually on a main and the solver sees two unrelated objects.
Set a snap tolerance, and optionally also join branches that meet a pipe mid-span, which splits the main at the junction so the branch actually drains into it.
It reports isolated nodes and disconnected pieces before and after, so you can see what the repair achieved rather than trusting it. Planned splits are listed before they are applied.
Merge nodes
Section titled “Merge nodes”Where two nodes describe one physical structure - the usual result of two survey layers being imported together - merge them. Choose which node survives, set the surviving invert, and the other is deleted with everything that referenced it re-pointed.
Split a conduit
Section titled “Split a conduit”Click a point on a pipe to split it into two, with a new junction at the break. Useful for inserting a connection, a change of size, or a structure the model was missing.
Reverse adverse-slope conduits
Section titled “Reverse adverse-slope conduits”A conduit whose outlet invert is higher than its inlet runs uphill. Sometimes that is real (a rising main, a surcharged section); far more often it is a digitising direction error.
The tool lists them steepest first and can take flow direction from the hydraulic gradient rather than from the drawn direction. Set ignore rises under to a tolerance so that survey noise of a few millimetres does not fill the list.