Skip to content

IFC 4.3 export

A contractor coordinating a site does not open SWMM. They open a BIM tool, federate every discipline’s model and look for conflicts. BIM workflow & handover ▸ Export as IFC 4.3 (BIM handover) gives them your network in the format that federation expects.

A geometric and topological handover: pipe segments with their real diameters and invert levels, chambers at the nodes, a drainage system grouping them, and georeferencing.

The failure mode that matters is silent invalidity: a file that opens in one viewer and is rejected by the contractor’s, discovered late and by them. Three defences:

  1. A deliberately narrow entity set. Everything emitted is a well-trodden part of the schema. Nothing speculative.
  2. No dangling references. Every #id is emitted by the same allocator that wrote the entity, and a test parses the output back and proves every reference resolves.
  3. Stable GlobalIds, derived from the element id. Re-exporting the same network produces the same GUIDs, so a contractor federating twice sees one pipe updated, not a second pipe appear.

The export was audited against all 44 rules of a real IFC validator, not just the four that happened to fire first.

Where the model carries a known projected CRS, an IfcMapConversion places the network on the earth so it lands on the coordinator’s site rather than at a local origin.

It is all three values or none. A partial or assumed map conversion is worse than none at all: it looks authoritative and silently drops the network at the CRS false origin, which for British National Grid is a point in the sea south-west of Cornwall.

We do not ship an IFC viewer and do not intend to - there are good free ones online, such as ifcvieweronline.eu. For a quick look at your own network without leaving the app, use the 3D underground view.

Requires a Pro plan.