Skip to content

3D underground view

A plan view flattens the one dimension a buried network is organised by. The 3D underground button, beside the map’s 3D button, draws the network at true depth beneath a translucent ground surface.

  • Ground opacity fades the surface. Slide it to zero to lift the lid off entirely.
  • Pipe opacity fades the pipe wall so you can see the water inside it.
  • Vertical exaggeration stretches depth, which is usually necessary: a real network is hundreds of metres wide and a few metres deep, and at true scale it looks flat.
  • Colour by shades the pipes by any result attribute.
  • Reset view (or R) returns to the opening framing when you have flown somewhere odd.

Chambers are drawn at the nodes at their real depth, so a deep manhole looks deep.

The results play in 3D rather than only on the map. Water fills the pipes to the computed depth, flow particles show direction and speed, and surcharge and flooding are shown where nodes reach the surface.

Seeing a hydraulic grade line climb a chamber and come out at ground level explains a flooding result to a non-modeller faster than any chart.

Trace a route on the map, then Fly the route travels it from inside the pipe. It is the view a CCTV survey gives, from a model you already have, and it makes gradient changes and adverse falls immediately obvious.

  • Section plane cuts the scene north-south or east-west, so you can look at a crossing head on.
  • Measure reports the 3D distance between two clicked points, along with the plan distance and the vertical difference separately - which are the three numbers a separation argument actually needs.
  • Water mains draws the water network, and ticking it turns clash findings on with it.
  • Clash findings marks each conflict as a clickable sphere coloured by severity.

City above ground fetches footprints from OpenStreetMap and stands them on the surface, so the network sits under a recognisable street rather than in a void. They are only fetched when you switch the overlay on.

Trench excavation draws the dig around each pipe and reports the total volume beside the toggle, along with how many pipes could not be priced because the model never stated their ground level. Seeing the excluded count next to the total is the fastest way to notice that a quantity is incomplete. The full breakdown is in trench quantities.

Terrain drapes real ground. Where a Cesium ion token is configured it uses Cesium World Terrain; otherwise open elevation tiles. The source is named in the panel, because a terrain surface that is quietly a coarse fallback would flatter a cover calculation.

  • Export 3D model (.glb) writes the scene as a standard glTF binary that opens in Blender, Windows 3D Viewer, or any BIM tool that reads glTF. The panel reports the triangle count, and says plainly that the IFC export is the contractual one - a .glb is a picture of the network, not a handover of it.
  • Capture for the report stores a still that is embedded in the interactive report. One is kept at a time - capture again to replace it.
  • Share publishes the view.

A georeferenced model is needed for terrain and the city overlay; the view itself works without one.

Requires a Pro plan.