Skip to content

Glossary

Antecedent dry period - time since the last storm. Drives how much pollutant has built up on surfaces.

Continuity error - the percentage of water the model failed to account for. Under about 1 percent is good; above 5 percent the results are not trustworthy.

CSO - combined sewer overflow. A structure that discharges to a watercourse when the combined system exceeds capacity, protecting the network from surcharge.

d/D - depth over diameter. How full a pipe ran. 1.0 means completely full. For a circular pipe, d/D = 0.5 is exactly half the full-bore capacity.

Dry-weather flow (DWF) - sanitary flow when it is not raining.

Dynamic wave - the full hydraulic routing method. Required for backwater, surcharge, pressurised flow, loops and overflow structures.

First flush - the early part of a storm carrying a disproportionate pollutant load, because build-up is mobilised quickly and then depleted.

Freeboard - spare depth between the peak water level and the node rim. Negative means the node surcharged above ground.

Froude number - ratio of inertial to gravitational force. Below 1 is subcritical, above 1 supercritical. Near 1 the flow is unstable.

Hydraulic grade line (HGL) - the water surface elevation along a pipe run. Visible in the profile view; rising above the pipe crown means surcharge.

I&I - infiltration and inflow. Water entering a foul sewer that is not sewage.

Kinematic wave - a simplified routing method. Fast and stable, but cannot represent backwater or surcharge.

LID - low-impact development. Source controls such as permeable paving and bio-retention.

Manning’s n - roughness coefficient. Typically 0.013 for concrete or plastic pipe.

NSE - Nash-Sutcliffe efficiency, a calibration measure. 1.0 is perfect; 0 means the model is no better than using the mean of the observations.

PBIAS - percent bias. Systematic over- or under-prediction in calibration.

Pollutograph - concentration plotted against time, the quality equivalent of a hydrograph.

RDII - rainfall-derived infiltration and inflow. The part of I&I that responds to rain. Modelled with RTK unit hydrographs.

RTK - the three-triangle unit hydrograph method for RDII. R is the fraction of rainfall entering the sewer, T the hours to peak, K the recession ratio.

Self-cleansing velocity - the minimum velocity that keeps solids in suspension, around 0.6 m/s or 2 ft/s. Below it, solids deposit and the sewer becomes septic.

Subcatchment - an area of land whose runoff drains to one point.

Surcharge - flow under pressure, above the pipe crown. Not the same as flooding, which is water leaving the system.

Thiessen polygon - nearest-node area allocation. Each point owns the area closer to it than to any other point.

Time of concentration (Tc) - time for runoff to travel from the furthest point of a catchment to the point of interest. Determines which rainfall duration is relevant.